Backup & Restore
Why should I use the application backup action?#
The application backup workflow coordinates a consistent database snapshot and associated managed data. Copying an open SQLite database manually can miss journal/WAL content or attachments. Use the reported backup/verification status, keep the archive intact and store another copy away from the working disk.
How often should I create backups?#
Choose a schedule appropriate to how much work the laboratory can afford to re-enter, and make additional backups before upgrades, restore/reset or major configuration changes. Follow your retention and security policy. The software’s availability does not replace an operator checking that recent recoverable copies actually exist.
How do I know a backup succeeded?#
Read the application’s final result and any verification/partial warning. Check the recorded time and intended destination. A file with a plausible name is not enough. Periodically test recovery on a separate authorized installation or disposable workspace without replacing the live laboratory.
How do I restore a backup safely?#
Stop routine work and confirm the exact backup and laboratory identity. Use the supported Restore workflow, read the replacement/safety-backup warnings and follow restart instructions. Keep the current safety copy until the restored system is verified. A restore replaces the working data context; it does not merge unrelated patient databases.
What is the difference between restore and reset?#
Restore installs a selected backup into the supported data workspace. Reset intentionally removes/reinitializes defined working data under the application’s confirmation policy. Both can be disruptive and require appropriate permissions and safety checks. Neither is a normal way to clear a single wrong patient entry.
What should I check before changing computers?#
Create and verify a current backup, retain approved report assets and review the license transfer/activation procedure. Install the supported application on the destination and restore through its workflow. Check patient counts, attachments, reports, printers and permissions before retiring the old installation. Do not assume copying the program folder transfers the license or all managed data.
Why does a backup show a warning?#
Read the named item: a database snapshot may succeed while an attachment, verification step, destination or retained component has a problem. Preserve the warning and original archive. Resolve the cause and create another verified copy. Do not rename a warning archive to make it appear fully verified.
What if restore or maintenance is cancelled?#
Read the reported outcome and keep the original/safety archives. Confirm the application has resumed its intended database. Do not manually mix files from partially staged folders. If the state is uncertain, stop new clinical work and provide the exact maintenance messages to support.
How does maintenance affect routine work?#
Before database-replacing maintenance, make a verified safety backup. Confirm the restored or reset database is active before resuming routine entry. Do not manually mix files from different database snapshots.
Can I delete old backups from within the data folder?#
Follow the supported retention workflow and your laboratory policy. Keep at least the recoverable copies required for operations and obligations. Never delete the only verified archive or a safety copy while a restore/reset issue is being investigated. Backups may contain sensitive information and need controlled storage and disposal.
Does deleting a visit remove it from old backups?#
No. Existing backups and exported/printed documents are outside the current working-database deletion operation. Treat them under the laboratory’s separate retention, privacy and disposal policy. Restoring an older archive can reintroduce the state that existed when that archive was created.
What details should I give support about a backup problem?#
Provide application version, operation type, timestamp, destination type and the exact error/warning text. State whether routine work continued afterward. Do not send a patient database, backup archive, passwords or license signing material through the contact form unless an explicitly agreed secure process requires it.
How do I set up automatic backups?#
Open Backup & Restore and the Automatic Backup section. Tick Enable Automatic Backup, choose Daily or Weekly, choose how many automatic backups to keep (7, 14 or 30) and set the Backup location with Choose Folder. Changes need the backup management permission. Automatic backups run only while LabProton is open and someone is signed in; a failed attempt is retried after fifteen minutes. Only older automatic backups are removed by the keep setting; manual backups are not. Still copy a recent backup to another drive regularly.
What is the backup password and recovery code?#
Without a backup password, backups are verified ZIP archives that anyone with the file can open. An administrator can choose Backup password… and set a password of at least six characters; new backups are then encrypted. On another computer an encrypted backup opens only with that password or the recovery code, so store both safely and separately from the backup files. Never send the password or recovery code in a support message.
What does LabProton show before a restore?#
After you choose a backup in Restore from Backup and authorize it, LabProton shows when the backup was created, which version made it, its patient, visit and user-account counts, and its active administrators. If your own account is not an active administrator in that backup you are warned, because you may not be able to sign in afterwards; make sure you know an administrator password listed there. A verified safety backup of the current data is made first, and the restore is applied when LabProton restarts.
Settings & Tools
How do I change the language?#
Open Settings and Language, choose a supported language and apply/save it through the available action. English/Arabic and optional language packs have defined fallback behavior. Clinical labels may intentionally remain English in specialized reports. If a translation is missing, preserve the field meaning and report the exact screen/text to support.
How do I change theme and text size?#
Open Theme & Appearance from Settings. Choose Ocean, Light, Brown or Pearl in the list on the left; the large preview on the right shows the Home page in that theme. Under Text size, below Pearl, choose Aa 100% (the default), Aa 110% or Aa 120%. Text size changes only the text: windows, cards, icons and spacing keep the same size, so larger text may wrap onto another line or be shortened with … where space is fixed. Both choices apply at once and are saved for your account only. Printed reports, PDFs and labels keep their own sizes.
How do I create a staff account?#
Use the Users/Permissions settings with administrator authority. Create an individual account, assign only the role/permissions needed, and communicate credentials securely. Test access with that account. Avoid sharing administrator passwords; account identity is used in clinical and accounting audit evidence.
How do I change my password?#
Use the account/password settings, enter the current password and the new password/confirmation, then save. Follow the stated requirements. If you cannot authenticate, use the authorized account recovery process rather than modifying password records in the database. Do not include passwords in a support message.
How do I edit the test catalog?#
Use the authorized catalog editor to change active tests, parameter definitions, units, prices or references. Save explicitly and review validation errors. Historical results/price snapshots are not simply rewritten by editing today’s catalog. Check applicable reference intervals and report templates before using a changed definition routinely.
How do test profiles work?#
Profiles group configured examinations for ordering. Review which active tests belong to a profile before adding it to a visit. Inactive or unsuitable members may be skipped/refused according to the workflow. Changing a profile later does not mean every old visit has been reordered.
Where do I print patient QR and barcode labels?#
On Patients load the exact saved visit and open Barcodes & QR beside directory search. Choose Patient QR, Visit barcode and/or selected sample labels. Select a real installed printer and the configured roll/A4 format. Preview and check patient identity before printing.
What is the difference between patient QR, visit and sample codes?#
Patient QR is a permanent local patient identity. A visit Code128 identifies the exact visit. A unique sample code identifies its owning visit/sample context and routes through the supported Results workflow. Reprinting an existing code does not create a new physical specimen identity.
How do I add or reprint sample labels?#
Use Add Sample only for additional physical containers and choose the supported container/quantity. Existing samples appear in the table; select them to reprint the same IDs. Per-sample copies multiply by the global Copies value. Read the summary and keep within job limits. Preview/cancelled printing must not create new sample IDs.
How do A4 slots and label roll settings work?#
Label roll output uses the configured physical label dimensions. A4 output lays labels onto the configured sheet grid and uses First A4 slot to skip already used positions. Confirm the sheet matches those dimensions and gaps. Do not stretch barcodes to compensate for a wrong driver or paper size.
Where does scanning a code take me?#
Use the Scan code field, not the normal name search. Patient QR opens the patient and supported active-visit scope; a visit code loads that exact visit; sample code opens its owning Results context. Unknown/deleted or conflicting codes must be refused. Clear/reset normal search to leave an intentional scan scope.
How do I manage inventory batches?#
Open Inventory, select the intended test/item and enter the batch/lot, quantity, expiry and thresholds as supported. Save and check the resulting stock/status. Keep different lots and expiry dates distinct. Do not alter stock history directly to hide usage; review the associated ordering/result workflow if quantities appear unexpected.
How do I use and edit How To notes?#
Choose a procedure on Home to read its instructions and open its PDF attachments. Use How To Manager with the required permission to create/edit a note or attach supported files. Save changes explicitly. These are laboratory procedure documents, so method/clinical wording should be approved rather than changed merely for appearance.
How do I use Statistics without mixing money totals?#
Choose the intended date/filter scope and read the displayed measure. Statistics uses test-based rows and defined financial scopes; no-test Free visits may be excluded by design. Page through results or use the supported export. Keep denominations separate and distinguish charges, receipts and due balances when reconciling Finance.
What should I do before leaving a settings editor?#
Save your changes explicitly first. If you leave a catalog, users, profile, report designer, How To or other editor with unsaved changes, LabProton asks “Are you sure you want to cancel?”. Yes discards the unsaved edits; No, Escape or closing the question keeps the editor open with your edits. The question never saves anything, and saving still applies the normal validation and permissions. A changed selection is not proof that a failed preference write succeeded.
How do Statistics filters and periods work?#
Choose Period (Today, This Week, This Month, This Year or Custom Range with From and To) and, if needed, Referral, Age, Test Group and Test. Statistics count visits and revenue by visit date. Age groups use the patient’s age at the visit; visits with an unknown age appear only under All Ages. Test Statistics shows test counts and money per test; Patient Statistics shows one row per matching visit. For dated cash collections use Finance, because Statistics amounts follow visit and test dates.
How do I choose Patient Statistics columns and page through results?#
On Patient Statistics choose Columns and tick or clear Phone, Age, Tests, Total Price, Paid, Due and Referral; Date, Patient and Billing always remain. The choice lasts for the current session. Tables show ten rows at a time; use Previous and Next in the bottom bar. Preview, Print and Export use the selected columns and include every row that matches the filters, not only the page on screen. Preview opens a PDF in your web browser and Export creates a CSV file; each needs its Statistics permission.
How does inventory count usage and show stock status?#
When the first result of an ordered patient test is saved, one unit is taken from that test’s earliest-expiring lot that is in stock and not expired. QC runs and repeated saves do not use stock. Status shows Expired, Order Now (at or below Order Now At), Expiring (within 30 days), Low Stock (at or below Low Stock At) or Good. Defaults are 3 for Low Stock At and 1 for Order Now At, and Order Now At must be lower than Low Stock At. Enter each new lot with its own expiry date.
How do I send a message to LabProton support?#
Open Support, choose Contact, and fill in Name, Email, Subject and Message, then choose Send Message. An internet connection is needed only for sending. If something is missing or invalid, the message beside Send names the field and moves the cursor there; your text is kept. When the server accepts the message you see “Message received. Reference: LP-…”. Keep that reference for follow-up; it confirms receipt, not that a reply has been sent. Do not include patient names, results, passwords or license files. Describe the screen, the steps and the exact error text.
What should I do when a support message cannot be sent?#
Your draft stays saved on this computer. If the connection timed out or the message could not be confirmed, check the internet connection and choose Send Message again without changing the text; an unchanged retry is recognised by the server and is not delivered twice. “Too many messages were sent” means the hourly limit was reached; try again later. If the draft itself cannot be saved, check free disk space and permissions. For urgent problems use the official channels shown on the Support page.
Didn’t find your answer? Clients can open a support ticket; anyone can contact us.
Contact LabProton